The Jupio JBC0160 USB Multi Charger is an intelligent 2-slots battery charger especially made for lithium-ion and LiFePO4 cylindrical battery cells like for instance the 3,7V 18650, 21700 or 26650. In total there are 12 different li-ion and LiFePO4 cylindrical battery cells that can be charged. More and more products like flash lights or e-smokers use these kind of battery cells, so the Jupio JBC0160 USB Multi Charger is a very convenient and welcome product. Besides the battery cells mentioned above, you can also charge your familiar rechargeable Ni-MH AA and AAA batteries. 

The Jupio JBC0160 USB Multi Charger has 3 different charging modes in terms of speed. When you have all the time of the world, you can select the slowest mode of 0,5A. It is the best mode if you prefer the longest life cycle of the batteries possible. If you are in a hurry though, then you can select the fastest mode. The charger will then charge with a speed of 2,0A and before you know it, the batteries are full again and you are good to go. For the ones that can't choose, you can also select the mode that is a bit of both worlds and select the middle of the road mode with a charging current of 1,0A. You can even choose this separately for both batteries.

All this is shown on a very clear LCD display with backlight, so you can also check the status at night. But the display shows more than just the charging speed. It also shows the charging status in a percentage, the voltage and measures the capacity of the batteries.

This charger is equipped with a USB Type-C port and a USB Type-C to USB Type-A cable is included inside the package.

Here below you can find all the suitable rechargable batteries that can be charged:

14500
16340
17500
17670
18350
18490
18500
18650
18700
21700
22650
25500
26650
AA Ni-MH
AAA Ni-MH